ACX1000 Quick Start Guide |
| ACX1000 Quick Start Guide | ACX1000 Quick Start Guide | |
|
|
|
|
|
1. Quick Setup
This section briefly describes how to install your Repeater or Cross Repeater. Unless you are an experienced user, we recommend that you follow the procedures described in the rest of this guide.
2. Installation
For
2.1 What’s Included
Your package should include the following items. If anything is missing or damaged, contact Black Box Technical Support at
•Repeater/Cross Repeater
•
•U.S. power cord
•This Quick Start Guide
Page 2 |
2.2 System Setup
To install your Repeater/Cross Repeater:
1.Switch off all devices.
2.Connect the interconnect cable to the local device’s interconnect socket and the repeater/cross repeater.
3.Connect the interconnect cable to the remote device’s interconnect socket and the repeater/cross repeater.
4.Connect the
NOTE: Use only the power supply that you received with this unit or a
3.Hardware Description 3.1 Device Views
Figure 1. Repeater/cross repeater CATx view.
Figure 2. Repeater/cross repeater fiber view.
3.2 Diagnostics
Each repeater/cross repeater has three LED indicators: Power, Data Error, and Link Status. The Power LED is next to the power socket.
Page 3 |
Figure 3. Diagnostic LEDs on the repeater/
cross repeater.
Table 1. LED indicators and their functions.
LED | Setting | Description |
Power (red) | Off | Device not ready |
| On | Device ready |
Link Status | Blinking | No interconnect |
(green) |
| connection via CATx |
|
| or fiber cable |
| On | Device ready |
Data Error (green) |
| Not used |
4. Service Setup
For most applications, you won’t need to make any adjustments to set up your repeater/cross repeater.
For some applications, you may need to open the repeater. Unscrew the
Figure 4. Removing the screws.
Page 4 |