Black Box C6AMP70-48, C6AMP70-24 manual Assembly Instructions, Page

24- and 48-Port Category 6A Staggered Patch Panels User Manual

Assembly Instructions

1. Terminate the individual GigaTrue Category 6A jacks using the instruction sheets supplied with those products. NOTE: Do not install Category 6A jacks onto the panel first.

2. Insert the terminated jacks into the unloaded adapter panel. See Figure 1.

1 2

3	4
	5	6
			7
				8
				9	10
						11
							12

GigaTrue Category 6A

Staggered Patch Panel

(C6AMP70-24)

13 14

15 16

17 18

GigaTrue Category 6A jack

19	20
		21
			22
				23
					24

Category 6A

Figure 1. Installing the Category 6A jacks into the patch panel.

3.Without using the cable management bar, mount the panels in a standard 19" relay rack using the supplied hardware. See Figure 2.

#12-24 or #10-32 cuphead Phillips screws (supplied)

1
2
3	4
	5
	6
	7	8
		9	10
				11
					12
						13
							14
							15	16
								17	18
										19
											20
GigaTrue Category 6A											21	22
												23	24
Staggered Patch Panel
													Cate
													gory 6A

(C6AMP70-24)

19" rack

#12-24 or #10-32 cuphead Phillips screws (supplied)

Figure 2. Installing the patch panel onto a rack.

Using the Cable Management Bar

1.Remove the two cuphead screws from the rear side of the patch panel.

2.Position the cable management bar on the patch panel and reinstall the two cuphead screws to secure the cable management bar.

3.Place the horizontal cable in one of the panel’s rear ports. Unscrew the corresponding silver clip behind the installed port and position the horizontal cable under the silver bracket. Tighten the screw.

4.For a 48-port patch panel (C6AMP70-48), repeat Steps 1 through 3 to install the second cable management bar.

Page 3