Black Box hardened pol poe ethernet extenders manual One-Channel Hardened Ethernet Extender, Ports

10/100Base-TX Hardened PoL/PoE Ethernet Extender

One-Channel Hardened Ethernet Extender

Ports

The Hardened Ethernet Extender provides TX ports and one Ethernet Extender port.

For the TX ports, it uses RJ-45 connectors and auto senses the speed of 10/100 Mbps.

For the Ethernet Extender port, it uses RJ-11 and Terminal Block connectors and auto senses the speed of Link (below 20)/20/40/60/80/100Mbps.

Ethernet Extender Mode Settings

Ethernet Extender mode settings are simple using a DIP (Dual Inline Package) switch on the top panel of the Hardened Ethernet Extender.

DIP Switch

DIP	Down	Up
Switch
Transmitter
PoL	Disable Power over Link	Enable Power over Link
	Std (Standard)	Per (Performance)
Type	Standard line speed	Better line speed
	Better noise immunity	Poor noise immunity
Receiver
Mode	Loc (Local)	Rmt (Remote)
	Set Receiver to Local Mode	Set Receiver to Remote Mode
	Std (Standard)	Per (Performance)
Type	Standard line speed	Better line speed
	Better noise immunity	Poor noise immunity

User’s Manual 10