Black Box LBPS310A-KIT, LBPS312A, LBPS311A, hardened pol poe ethernet extenders manual 48VDC

10/100Base-TX Hardened PoL/PoE Ethernet Extender

	Power Input Assignment
	Power1			48VDC			DC Jack
	Power2			T:46-57V / R:46-57V DC
				Power Ground
	Power3			T:46-57V / R:46-57V DC			Terminal
							Block
				Power Ground
				Earth Ground
DIP Switch		Down				Up
Transmitter
PoL		Disable Power over Link				Enable Power over Link
		Std (Standard)				Per (Performance)
Type		Standard line speed				Better line speed
		Better noise immunity				Poor noise immunity
Receiver
Mode		Loc (Local)				Rmt (Remote)
		Set Receiver to Local Mode				Set Receiver to Remote Mode
		Std (Standard)				Per (Performance)
Type		Standard line speed				Better line speed
		Better noise immunity				Poor noise immunity
LEDs		State	Indication
Power		Steady	Power received
1/2/3		Off	Power off
		Steady	Power Ethernet extension interface function is enabled
PoL		Off	No power is		transmitted over Ethernet extension
			interface
PoE		Steady	Powered device (PD) is connected
		Off	Powered device (PD) is disconnected
		Steady	A valid Extender connection is established
		Fast	Data is being transmitted or received
Link		Flashing
		Slow	Extender port under negotiation mode
		Flashing
		Off	Extender interface connection is not established
Line		Steady	Displays the link speed in Mbps
Speed
PSE		Steady	PoE power can be transmitted for PD
Output		All off	No PoE power can be transmitted for PD
			Steady		A valid Ethernet connection established
		Green	Flashing		Data transmitted or received
			Off		Non-Ethernet connection is established
		Yellow	Steady		Link speed at 100Mbps
			Off		Link speed at 10Mbps

User’s Manual 3