SERVSELECT™ IP INSTALLER/USER GUIDE
22
CHAPTER 4: ANALOG PORT OPERATION
23
Assigning server names
Use the Names dialog box to identify individual servers by name rather than by port
number. The Names list is always sorted by port order. Names are stored in the
SAM, so even if you move the cable/server to another ARI port, the name and
configuration will be recognized by the appliance.
NOTE:
If a server is turned off, its resp ective SAM will not appe ar in the Names list.
To access the Names dialog box:
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup - Names. The Names dialog box appears.
Figure 4-3. Names Dialog Box
NOTE:
If the server list change s, the mouse cursor w ill turn into an hourgla ss as the list is autom atically
updated. No mouse or keyboard inp ut will be accepted unti l the list update is compl ete.
To assign names to servers:
1. In the Names dialog box, select a server name or port number and click Modify.
The Name Modify dialog box appears.
Figure 4-4. Name Modify Dialog Box