CHAPTER 4: ANALOG PORT OPERATION
Figure 4-16. Scan Dialog Box
3.Determine the order within the list to add the server. If there are no servers in the scan list, your cursor will appear in a blank line at the top of the list.
To add a server to the end of the list, place your cursor in the last server entry and press the Down Arrow key.
To add a server in the midst of an existing list, place your cursor at the entry below where you want to insert a new server and press Insert.
4.Type the first few characters of a server name or port number to scan. The first matching server will appear in the line.
To move through the list, press the following keyboard commands in the Name, Port or Sec column to move through the list of servers available to scan.
a.Press Alt+Down Arrow to move the cursor down through the list of servers.
b.Press Alt+Up Arrow to move the cursor up through the list of servers.
c.Press Alt+Home to move the cursor to the first server in the list.
d.Press Alt+End to move the cursor to the last server in the list.
5.In the Sec column, type the number of seconds (from 3 to 255) of desired time before the scan moves to the next server in the sequence.
6.Move the cursor to the next line or press the Down Arrow and repeat steps
7.Click OK.
To remove a server from the scan list:
1.In the Scan dialog box, click the server to be removed.
2.Press Delete.
Press Shift+Delete to remove the selected server and all entries below it.
3.Click OK.
33
