SERVSELECT™ IP INSTALLER/USER GUIDE
34
CHAPTER 4: ANALOG PORT OPERATION
35
To start the scan mode:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands. The Command dialog box appears.
Figure 4-17. Command Dialog Box
3. Select Scan Enable in the Command dialog box.
4. Click X to close the Command dialog box.
NOTE:
Scanning will commen ce when the Ma in dialog box or ag is displayed . Scanning is i nhibited in
any other the OSD dialog box.
To cancel scan mode:
1. Select a server if the OSD is open.
-or-
Move the mouse or press any key on the keyboard if the OSD is not open.
Scanning will stop at the currently selected server.
-or-
Press Print Screen. The Main dialog box will appear.
2. Click Commands. The Command dialog box appears.
3. Clear Scan Enable.
4.9 Broadcasting to Servers
The analog user can simultaneously control more than one server in a system, to
ensure that all selected servers receive identical input. You can choose to broadcast
keystrokes and/or mouse movements independently.
NOTE:
You can broadcast to up to 16 servers at a tim e, one server per ARI port .