ULTRA2 LVD SCSI HOST ADAPTER

Question: Is it really necessary to terminate the last SCSI device on the cable?

Answer: Not if the cable itself is terminated. But if the cable is not terminated, you must make sure that the device is terminated. Improper termination at either end of the SCSI bus will cause the Adapter not to work properly, or even not to initialize at all (the driver will fail to load).

Question: How do I set the burst-transfer rate for SCSI devices?

Answer: You can set the maximum synchronous transfer rate of a given device with the SmartSCSI Utility. To run the Utility, press <Ctrl> <I> at system bootup; click on “Device Setup” and follow the on-screen options to select the desired transfer rate (see Section 4.6.3).

Question: Under SCO UnixWare®, the system displays a panic message or crashes during bootup.

Answer: Reboot the system and verify that the interrupt setting of the Adapter’s kernel conforms to UNIX standards. Please refer to your system’s documentation for information about setting the interrupt levels and your peripherals’ documentation for help in setting SCSI IDs.

In order to boot from the old UnixWare kernel, reboot the system and take the following steps:

1.Begin an interactive boot session by pressing the space bar at the BOOTING UNIXWARE prompt.

2.At the system’s [boot]# prompt, type KERNEL=unix.org < ENTER >.

3.Type go < ENTER >.

Consult the SCO UnixWare Installation Handbook’s “Troubleshooting” section to help isolate the problem. If it becomes necessary to remove the Adapter’s SCO UnixWare device driver, refer to Section 5.8.4.

82

Page 83
Image 83
Black Box SCSI-2 LVD manual ULTRA2 LVD Scsi Host Adapter

SCSI-2 LVD specifications

The Black Box SCSI-2 LVD (Low Voltage Differential) represents a significant advancement in data storage and connectivity technology, particularly in environments requiring high performance and reliability. As a variant of the SCSI (Small Computer System Interface) standard, it is optimized for faster data communication, essential for modern computing needs.

One of the main features of SCSI-2 LVD is its capability to handle increased data transfer speeds compared to its predecessors. It supports a maximum data transfer rate of up to 80 MB/s, which is double that of the original SCSI-2 single-ended signaling. This increase in speed is largely due to the differential signaling that LVD employs, allowing for reduced electromagnetic interference and extended cable lengths while maintaining signal integrity. The technology effectively converts the SCSI bus into a more robust system that can accommodate various devices without compromising performance.

The SCSI-2 LVD standard is backward compatible, meaning that it can interface with older SCSI devices, albeit at reduced speeds. This compatibility is significant for users looking to upgrade their systems without discarding existing hardware. This makes SCSI-2 LVD an attractive choice for enterprise environments where legacy systems are common.

Another key characteristic is the flexible cabling options provided by SCSI-2 LVD. It can support cable lengths of up to 12 meters, which is beneficial for large data center configurations where space between devices can be substantial. This extended range does not typically come at the expense of performance, ensuring that data integrity remains high, even over longer distances.

In terms of technology, LVD employs lower voltage levels, which not only contributes to greater power efficiency but also minimizes heat generation in devices. This is particularly crucial in data centers where temperature management can impact hardware longevity and reliability. The combination of lower voltage use and differential signaling makes SCSI-2 LVD well-suited for high-density environments.

Error correction and handshaking features are also integral to SCSI-2 LVD, enhancing its robustness against data loss during transmission. These characteristics make it a reliable choice for applications requiring consistent and high-speed data access, such as server arrays and high-performance computing tasks.

Overall, Black Box SCSI-2 LVD stands out due to its impressive speed, compatibility, and extensive cabling options, positioning it as a reliable solution for demanding data environments. It effectively bridges the gap between legacy systems and modern technology, ensuring that users can optimize their data handling capabilities without significant disruption.