Black Box ACU5250A-R2, ACU505A-R2 Connections at the local module 3.2.1.1 Video connections

ServSwitch Wizard VGA/USB

3.2 Connections

Installation of the modules is straightforward and requires minimal configuration in most cases.

•Connections at the local module

•Connections at the remote module

IMPORTANT: The ServSwitch Wizard VGA-USB can be used with other hubs in the system, but please note that the local unit should not be connected to the downstream port of a bus-powered hub due to power constraints. Additionally, dual-variant local units must always be powered using their supplied power adapter. Please see section 3.2.1.5 Local module power for details.

3.2.1 Connections at the local module 3.2.1.1 Video connections

1Where possible ensure that power is disconnected from the computer system to be connected.

2Use the supplied VGA link cable to connect the VGA input socket of the local module to the video output socket of the com-

puter as shown in Figure 3-3:

OUT

IN

	r
e
S	B

IN

Figure 3-3. Attaching the VGA video link cable

[Dual-variant only] Optionally attach a second	T
video input from the computer system.	OU
	IN
	IN
	IN	B
	A

To secondary video

output port

B

To primary video

output port

Figure 3-4. Attaching two VGA video link cables to the dual-variant local module

Page 10 724-746-5500 blackbox.com