Black Box ServSwitch Wizard VGA/USB, ACU505A-R2, ACU5250A-R2 Optionally attaching stereo speakers

Chapter 3: Installation

3.2.2.2 USB connections

1 Attach the leads of up to four USB devices (two of which are usually a keyboard and mouse) to the sockets located adjacent to

the video output connector as shown in Figure 3-16:

TE REMO

B

A

Figure 3-16. Attaching the keyboard, mouse and other USB cables

[Dual-variant only] IMPORTANT: When connecting four USB devices to the remote module, ensure that their total power requirements do not exceed 1700mA (1.7A). The USB standard states a maximum allowable current draw of 500mA (0.5A) per device, although most devices remain well below this limit - USB keyboards and mice typically require 100mA. Each Wizard VGA-USB module contains a self-resetting fuse that will prevent damage by shutting down the unit if the total power draw becomes excessive.

3.2.2.3 Audio connections

1 Optionally attach the lead from your stereo speakers to the audio output socket on the remote module as shown in

Figure 3-17:

E N D E R

R
ON	TO
LOCAL
LINK

OUT

PO

WER

ON		TO
	L
	OCAL
	LIN
	K

OU

T

PO

WE

R

Figure 3-17. Optionally attaching stereo speakers

724-746-5500 blackbox.com Page 17