SHM-B ASYNC
easiest access to the terminals, switches, etc.
After a SHM-B Card is wired, it can then be inserted into an open slot in the SHM-B rack. Be certain that the circuit board has mated with the power pins on the SHM-B rack before applying force to fully seat the board; otherwise you may damage the board and power pins.
When all boards have been wired and plugged into the rack, plug the wall transformer into its power source. You should be able to communicate as described in Chapter 4. When all channels are operating, attach the SHM-B Rack front panel by first aligning the plunger latches with their respective holes in the rack. Press on the top and bottom of the panel to properly seat it, then firmly press in all six of the plunger latches to retrain the panel.
