SHM-B ASYNC
6. Troubleshooting Guide
The following information will help you troubleshoot your installation if problems develop. If your particular situation isn’t listed here, call Technical Support for assistance. Have ready a description of the problem with your installation, your DTE equipment make and models, your equipment’s DTE/DCE configuration and flow control type (hardware or software), your
SYMPTOM: LEDs do not light when power transformer is plugged into a wall outlet.
1.Is the power connection loose? Try moving or nudging the wall transformer.
2.Are there broken power leads? Disconnect the power supply. Remove the printed circuit board from the chassis. Inspect the three leads from the transformer for continuity.
3.The
4.
20
