6English

along the left border (17). You can specify the location on the picture by a letter-number combi- nation.

Calculating measurement from the grid pat- tern

When taking pictures at 1X magnification, each square of the grid pattern represents 5mm (0.2 in.). The chart below shows the value represented by each square in pictures taken at each magnifi- cation.

Magnification

Grid square value

1X

0.2 in.

5mm.

2X

0.1 in.

2.5 mm.

3X

0.07 in.

1.7mm.

Troubleshooting

Difficulty focusing

The ranging lights may be difficult to see when using the camera in very bright light, or when photographing very dark subjects. If you have dif- ficulty seeing the ranging lights:

Check that the camera is set for the desired magnification, and is at the correct distance from the subject.

Check that the film is not outdated.

Move the ranging lights to a lighter area on the subject.

Look over the top of the camera, rather than through the viewfinder.

Camera does not function

The flash and/or LED ranging lights will not func- tion if the film pack battery is weak or dead.

No image in viewfinder

The magnification selector knob is between set- tings.

Pictures too light

The camera may be too close to the subject for the selected magnification. The Lighten/Darken con-

trol may be set incorrectly. Very light subjects may require setting the control toward Darken. There may be bright ambient light affecting the exposure.

Pictures too dark

The camera may be too far from the subject for the selected magnification. The Lighten/Darken control may be set incorrectly. Very dark subjects may require setting the control toward Lighten.

Subject not sharp

The camera is at the wrong distance from the sub- ject. (Pictures also will be incorrectly exposed — too light or too dark.)

Portions of picture out of focus, or distorted subject

The camera is not parallel to the subject.

Care and Maintenance

Lens care

Avoid touching the lens. To remove dust or finger- prints, breathe on the lens and wipe it gently with a clean, soft facial tissue. Do not use silicone-treated eyeglass tissues.

Temperature

The camera and film are designed for use at temper- atures of 40–105°F (4–41°C). Store below 75°F

(24°C). Never leave film or a loaded camera in a hot area (such as the luggage compartment of a car).

Caution

To prevent electric shock, do not remove camera covers. No user serviceable parts inside. Refer ser- vicing to the nearest Polaroid Service Center.

EMC statement

Polaroid Corporation certifies that this product con- forms to the following standards:

Safety: Low Voltage Directive 73/23/EEC

EMC: EN55022, Class B; EN50082-1; IEC 801-2, 801-3

Page 5
Image 5
Polaroid Macro 3 SLR manual Troubleshooting, Care and Maintenance, EMC statement