724-746-5500 | blackbox.com
Page 6
724-746-5500 | blackbox.com
SmartPath Enterprise Wireless Access Point, Outdoor Installation Guide
Figure 3. Attaching the base and plane bracket.
3. Thread the open end of the hose strap through the two tabs on the base bracket.
4. Fit the hose strap around the pole and tighten the clamp with a 1/4” (2-cm) slotted screwdriver or a 5/16” (8-mm) drive socket
(or nut) driver.
Figure 4. Install the hose strap.
5. Connect the grounding cable to the grounding lug on the unit, as shown in Figure 10. Connect the other end of the cable to
an appropriate ground.
4.3 Horizontal Pole Mount
The following steps explain how to mount the LWN602WA on a horizontal pole.
1. To mount the LWN602WA on a horizontal pole, first attach the plane bracket to the back of the unit using the four hex-head
bolts with lock washers and flat washers.
2. Mount the base bracket to the plane bracket using the four round-head screws, so that is oriented horizontally. Each screw
should have a lock washer and flat washer.