Customer Support Information
VideoPlex4 Video Wall Controller
VSC-VPLEX4
Disclaimer
Trademarks Used in this Manual
Page
Trademarks Used in this Manual
Page
FCC and IC RFI Statements
Page
NOM Statement
Instrucciones de Seguridad
Page
Safety Instructions
Safety Instructions
Page
Table of Contents
Table of Contents
Page
Chapter 1 Specifications
1. Specifications
Page
2.2 Configuration Examples
Chapter 2 Overview
2. Overview 2.1 Introduction
Page
Figure 2-2.Divide the input signal into quadrants and display each quarter on separate displays with optional frame rate
Chapter 2 Overview
Page
Figure 2-3.Duplicate the input signal x2 and display one output on a single landscape display and divide the second output into
Chapter 2 Overview
Page
Chapter 2 Overview
Page
2.3 What’s Included
Chapter 2 Overview
Page
2.4Hardware Description 2.4.1 Front Panel
Chapter 2 Overview
Page
2.4.2 Back Panel
Chapter 2 Overview
Page
Chapter 3 Setting Up the VideoPlex4
3. Setting Up the VideoPlex4
4.2 Configuring DVI Input Resolution
Chapter 4 Configuring the VideoPlex4
4. Configuring the VideoPlex4
4.1 Factory Default Settings
Page
Chapter 4: Configuring the VideoPlex4
The regions of the input image to be displayed on a given output monitor can be programmed via USB by using the VideoPlex configuration application
5.2 Output
5.3 Configuring the VideoPlex4
Chapter 5 Operating Instructions
5. Operating Instructions 5.1 DVI Input
Page
Chapter 6 VideoPlex4 Control Application
6.2 Running the VideoPlex4 Control Application
Chapter 6 VideoPlex4 Control Application
6.3 Connection Diagram
6.4 Device
6.5 DVI-DInput
Page
Figure 6-4. DVI-Dinput settings dialog box
Chapter 6 VideoPlex4 Control Application
Figure 6-5. DVI-Dinput dialog box
Chapter 6 VideoPlex4 Control Application
Page
Page
6.6 Input Capture Regions
Chapter 6 VideoPlex4 Control Application
Page
6.7 Predefined Regions
6.8 Monitor Outputs
Chapter 6 VideoPlex4 Control Application
Figure 6-9.Timing dialog box
Chapter 6 VideoPlex4 Control Application
Page
Figure 6-8.Monitor outputs screen
Page
The source of mode selection controls whether the VideoPlex4 output should take its timing values and resolution from the preferred mode of the monitor that is connected, or use its internally programmed “default” mode
Chapter 6 VideoPlex4 Control Application
Page
About Black Box
Black Box Tech Support FREE! Live. 24/7
Tech support the way it should be
