Black Box VSC-VPLEX4 Connection Diagram, Device, DVI-DInput, VideoPlex4 Control Application, Page

Chapter 6: VideoPlex4 Control Application

The main control dialog is divided into the following groups:

•Connection Diagram

•DVI-D Input

•Input Capture Regions

•Device

•Monitor Outputs

6.3 Connection Diagram

The connection diagram displays a schematic view of the rear panel of the VideoPlex4 to assist in identifying the connectors.

Figure 6-2. Back of unit.

6.4 Device

The unique USB device name that is connected is displayed in the Device group. You can associate a more user-friendly name such as “First Four Outputs.” The friendly name is stored in non-volatile storage on the VideoPlex4 and can to help identify the device during future configurations. Specific devices connected to your PC can be selected using the ”Select Device” command on the File Menu. The VideoPlex4s will be listed by the USB device or by a previously configured friendly name.

6.5 DVI-D Input

The DVI-D Input group displays the current DVI mode that is being captured (if any) and the preferred mode that has been programmed into the VideoPlex4’s EDID. Use the Modify button to update the EDID. The small square to the left of the current input resolution indicates whether the VideoPlex4 has frame-locked to the input source.

•Green – The outputs are frame-locked to the input dot clock and vertical sync.

•Grey – The outputs are not frame-locked.

Figure 6-3. DVI-D input screen.

Page 20 724-746-5500 blackbox.com