Black Box VSC-VPLEX4, VideoPlex4 Video Wall Controller manual Back Panel, Overview, Page

Chapter 2: Overview

NOTE: When the VideoPlex4 is connected to a PC by a USB cable and the VideoPlex4 control application is active, all three lights flash to identify which unit is being controlled.

2.4.2 Back Panel

1 4 4

1	2	4	3	4	5
			Figure 2-9. Rear panel.

Table 2-2. Back-panel components.

Number	Indicator	Description
1	Sync Sockets	The Sync sockets are provided for future genlock enhancements. Leave them unconnected.
2	USB Socket	The USB socket is used to connect the VideoPlex4 to a PC via a USB connection using the supplied USB Type A to
		Type B cable. Configuration of the VideoPlex4 is programmable via an application utility, allowing easy control of
		cropping, scaling, rotation, and gaps.
3	DVI-D Input	The DVI-D Input socket is used to connect the DVI input source to the VideoPlex4. The VideoPlex4 supports
	Socket	dual-link DVI, single-link DVI, and also HDMI (not HDCP compliant) via the optional DVI/HDMI adapter (part
		number FA790).
4	DVI-I Output	The four DVI-I Out sockets are used to connect the VideoPlex4 to the output monitors. The VideoPlex4 supports
	Socket	both DVI and analog RGB monitors.
5	Power	The Power socket is where the supplied power source connects to the VideoPlex4. The power LED on the front of
		the VideoPlex4 illuminates when a power supply is connected.

Page 14 724-746-5500 blackbox.com