NOTES FOR THE INSTALLATION
GENERAL INFORMATION
The appliance must be installed in accordance with all relevant codes laid down by Electrical Supply Authorities. The original installation and adjustment must be made by a licensed electrician.
ELECTRICAL CONNECTION
The appliances are provided with a
CONNECTION OF THE FEEDING CABLE TO THE MAINS
Connect the feeding cable of the oven to a plug suitable for the load indicated on the rating plate of the product. In case of a direct connection to the mains (cable without plug), it is necessary to insert a suitable omnipolar switch before the appliance, with minimum opening between contacts of 3 mm (the grounding wire should not be interrupted by the switch).
Before connecting to the mains, make sure that:
•The electrical counter, the fuse, the feeding line and the socket are adequate to withstand the maximum load required (see rating plate).
•The supply system is regularly grounded, according to the regula- tions in force.
•The socket or the omnipolar switch can easily be reached after the installation of the oven.
•After carrying out the connection to the mains, check that the sup- plying cable does not come into contact with parts subject to heating.
•Never use reductions, shunts, adaptors which can cause overheating or burning.
The manufacturer is not liable for any direct or indirect damage caused by faulty installa- tion or connection. It is therefore necessary that all installation and connection operations are carried out by qualified personnel complying with the local and general regulations in force.
INSERTION AND ASSEMBLY
Insert the oven into the opening of the cabinet, resting it on the base and pushing it as far as the ledge of the side stanchions against the shoulder of the cabinet. For the dimen- sions of the oven see cabinet and technical data.
9
