| TECHNICAL DATA |
Pre-amplifier / subout
You can use the connections provided on your car radio to connect an external
We recommend that you use matching prod- ucts from the Blaupunkt or Velocity ranges.
Switch-on delay for external pre- amplifiers
To prevent speakers from crackling when you switch on the player, you can set a
➮Press the MENU button, 8.
➮Press the 
or 
button, 7, as often as is necessary for “AMP DLAY” to ap- pear in the display.
➮Press the
or
buttons, 7, in order to adjust the
“DLAY OFF” means that there is no switch- on delay, while “DELAY 1” to “DELAY 4” indi- cate the delay time in seconds.
➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.
Technical data
Amplifier
Output power: | 4 x 25 Watt sine wave |
| according to |
| DIN 45 324 at 14. 4 V |
| 4 x 45 Watt max. power |
Tuner
Wavebands: |
|
|
|
VHF (FM) | : | 87.5 – 108 MHz | |
MW | : | 531 | – 1,602 kHz |
LW | : | 153 | – 279 kHz |
FM frequency response:
30 - 15,000 Hz
CD
Frequency response:
20 - 20,000 Hz
4 channels: 4 V / 10 kΩ
AUX input
Sensitivity: | 1,2 V / 10 kΩ |
Subject to technical change!
ENGLISH
57
