Blaupunkt C50 Setting the sensitivity of the station search mode, Storing stations

➮ Press the preset station button 1-6> of the station you want to listen to.

Scanning receivable stations (SCAN)

You can briefly play all receivable sta- tions. You can set the scanning time in the menu.

➮ Select the memory or frequency range.

➮ Press one of the station buttons 1-6> for longer than one second to store the station to that button.

Storing stations automatically (Travelstore)

You can automatically store the six sta- tions with the strongest reception in your area.The stations are stored in the FMT or AM memory depending on the se- lected frequency range.

Note:

Stations that were previously stored in this memory are deleted in the process.

➮ Briefly press the TS button ?.

The automatic station storing procedure begins. “T-STORE” appears in the dis- play. After the process is completed, the station that is stored in location 1 of the respective memory level will be played.

RADIO MODE

The unit tunes into the next receivable station.

Manual station tuning

➮You can also tune into stations manually.

Press either the or button :.

Setting the sensitivity of the station search mode

You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak re- ception.

➮Press the MENU button 8.

➮Keep pressing the button :

until “SENS” appears in the display.

➮Press the button :.

➮Tune into the station that you want.

The display shows the currently set val- ue for sensitivity. “SENS HI” means that the tuner is highly sensitive. “SENS LO”

means it is set to the lowest sensitivity

setting. If “SENS LO” is selected, “lo”Listening to preset stations lights up in the display.

➮ Set the required sensitivity using the and buttons :.

➮ When you have finished making your changes, press the MENU button 8 or OK ;.

Storing stations

Storing stations manually

➮ Select the required memory (FM1, FM2 or FMT) or the AM frequency range.

10