VOLUME ADJUSTMENT
If a traffic announcement is received during a telephone call, or while the navigation system is speaking, the traf- fic announcement is not reproduced until the call or the speech output has finished.
If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be heard when the traffic announcement has finished.
The volume at which navigation output or telephone calls start is adjusted as follows:
➮Press the MENU button 8.
➮Press the 
or 
button : until “TEL/NAVI VOL”appears in the display.
➮Set the desired volume with the 
buttons :.
➮When the setting process is com- plete, press the MENU button 8 or OK ; twice.
Note:
You can adjust the volume level of tele- phone calls and of speech output as
they are made with the volume control 2.
Setting the volume for the confirmation tone
If you hold down a button for longer than two seconds when using certain func- tions, e.g. storing a station on a station button, a confirmation tone (beep) sounds. The volume of this beep is ad- justable.
➮Press the MENU button 8.
➮Press the 
or 
button : repeat- edly until “BEEP”appears on the display.
➮Adjust the volume using the 
and 
buttons :. “0”means the beep is off, “9”means maximum beep volume.
➮When you have completed the set-
ting, press either the MENU button 8 or OK ;.
32
