Blaupunkt DJ52, C52 Radio Mode, Radio mode, Switching to radio mode, RDS function AF, REG

Models: C52 DJ52

1 26
Download 26 pages 40.41 Kb
Page 11
Image 11

RADIO MODE

Radio mode

This unit is equipped with an RDS radio receiver. Many of the receivable FM sta- tions transmit a signal that not only car- ries the programme but also additional information such as the station name and programme type (PTY).

The station name appears on the dis- play as soon as it is received.

Switching to radio mode

If you are in cassette, CD changer or AUX mode,

press the BND/TS button 5

or

keep pressing the SRC button @ until “RADIO”appears in the dis- play.

RDS function (AF, REG)

The RDS functions AF (Alternative Fre- quency) and REG (Regional) extend your radio's range of functions.

AF: If this RDS function is activat- ed, the unit automatically tunes into the best receivable frequency for the station that is currently set.

REG: Some radio stations set aside some of their broadcasting time for regional programmes that provide different regional content. With the REG function, your car ra- dio is prevented from switching to alternative frequencies with a dif- ferent regional content.

Note:

REG has to be specially activated/ deactivated in the unit's menu.

Switching REG function on/off

To use the RDS functions AF and REG,

press the MENU button 8.

Press the or button : repeat- edly until “REG”appears on the display. “OFF”or “ON”will be dis- played alongside “REG”.

To switch REG on or off, press the

or button :.

Press the MENU button 8 or OK

;.

Switching the RDS convenience function on/off

To use the RDS functions AF and REG, press the RDS button 4.

The RDS convenience functions are active when RDS lights up on the dis- play with a symbol. When the RDS con- venience functions are activated, “REG ON”or “REG OFF”appears briefly on the display.

Selecting the waveband/ memory

This unit can receive programmes broadcast over the FM as well as MW and LW (AM) waveband. There are three preset memory levels for the FM range and one each for the MW and LW ranges.

Six stations can be stored on each memory level.

In order to switch between memory

levels or wavebands, briefly press the BND/TS button 5.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

33

Page 11
Image 11
Blaupunkt DJ52, C52 Radio Mode, Radio mode, Switching to radio mode, RDS function AF, REG, Selecting the waveband/ memory