Blaupunkt C52, DJ52 Sampling All the Tracks on a Cassette Scan, Fast Winding, Pausing During Play

CASSETTE MODE

Sampling All the Tracks on a Cassette (SCAN)

➮Hold down the OK button ; for longer than two seconds.

“CAS SCAN” appears in the display. Samples from all the tracks on the tape are played in ascending order.

To halt the scan

➮Press the OK button ; a second time.

The track that is currently being sam- pled will continue playing.

Note:

●The duration of samples can be adjusted. Refer to the section on “Setting Sample Time”under “Ra- dio Operation”.

●To use the S-CPS, RPT and SCAN functions, there must be a pause of at least three seconds between the tracks on the cassette.

Fast Winding

Fast forward

➮Press the button :. “FORWARD”appears in the display.

Fast rewind

➮Press the button :. “REWIND”appears in the display.

Stopping fast winding

➮Press the OK button ;. Play continues.

Note:

●While the tape is being fast wound, the last radio station tuned in can be listened to. This requires the “Radio monitor”function to be switched on.

Pausing During Play

To interrupt tape play

➮Press button 1 >.

Play is interrupted and “PAUSE” ap- pears in the display.

➮Press button 1 > again to resume play.

Switching the Radio Monitor On / off

Note:

●The radiomonitor can only be set if a cassette is being played.

➮Press the MENU button 8.

➮Press the or button : until “RM ON”or “RM OFF”appears in the display.

➮Press the or button : to switch the radio monitor on or off.

➮Press the MENU button 8 or OK

;.

40