Optimus L100 Shooting in the High Sensitivity Mode, Camera enters Bhigh sensitivity mode, Border

High Sensitivity Mode

Shooting in the High Sensitivity Mode

In high sensitivity mode, ISO sensitivity is set high to reduce blurring caused by camera shake or subject movement even when shooting under low lighting or with zoom applied. This allows you to capture the atmosphere of the scene without flash, or extend the effective range of the flash compared to other shooting modes (A 31).

•Image mode can be set to M Normal (2048) or smaller.

1Enter shooting-mode selection

menu by pressing Ain shooting mode. Use the multi selector H or Ito select the third icon from the top, and then press K.

Sport continuous

High Sensitivity Mode

2Press the multi selector Jor Kto choose B and press k.

The camera enters Bhigh sensitivity mode.

High sensitivity

3 Frame the subject and shoot.

• Raise the built-in flash when using the flash.

• When the camera recognizes a human face (front view), that face will be framed by a yellow double border.

Up to 12 faces can be recognized. If more	55
than one face is recognized, the face
nearest to the camera will be framed by a double border and the rest by a single
border.

•When shooting non-human subjects or when no faces are recognized, focus will be in the center of the monitor. Position the main subject near the center of the focus area.

50