Blaupunkt Las Vegas DJ31 Repeating tracks, Scanning all the tracks on a cassette Scan

CASSETTE MODE

Repeating tracks

➮Press button 3 (RPT) =.

The current track is repeated. RPT ap- pears in the display. When the end of the track is reached and the tape is re- winding, “RPT TRCK” appears in the display.

To stop repeating the track,

➮press button 3 (RPT) = again.

Normal playback is then continued. RPT disappears from the display.

Scanning all the tracks on a cassette (SCAN)

➮Press the SCAN button 4.

“CAS SCAN” appears in the display. All the tracks on the cassette are briefly played in ascending order.

To stop scanning,

➮Press the SCAN button 4again.

The current track will then continue to be played.

Note:

●You can set the scanning time. For further details, read the section en- titled “Setting the scantime” in the “Radio mode” chapter.

●In order for the S-CPS, RPT and SCAN functions to work properly, there must be a pause of at least three seconds between each track on the cassette.

Pausing playback (PAUSE)

To pause the cassette whilst it is play- ing,

➮press button 2 () =.

Playback is paused and “PAUSE” ap- pears in the display.

➮Press button 2 () = again to cancel pause.

Switching radiomonitor on/off

Note:

●You can switch the radiomonitor on/ off whilst a cassette is playing.

➮Press the MENU button <.

➮Keep pressing the or button ;until “RM ON” or “RM OFF” ap- pears in the display.

➮Press the or button ;to switch the radiomonitor on/off.

When you have finished making your changes,

➮press the MENU button <.

Skipping blank spaces (blankskip)

You can automatically skip blank spac- es on the tape that are longer than ten seconds. To do so, the “blankskip” fea- ture must be activated.

Note:

●You can switch “blankskip” on/off whilst a cassette is playing.

40