ADJUSTING THE VOLUME
You can find out from your Blaupunkt dealer which navigation systems can be used with your car radio.
If a traffic information message is re- ceived during a telephone call or whilst a navigation announcement is being made, the traffic message will only be played after the call or voice output is finished.
If you are already listening to a traffic announcement and a telephone call arrives or the navigation system wish- es to make a voice output, the traffic announcement will first be heard. Once the traffic message is finished, you can listen to the call or the voice output.
You can set the volume level at which telephone calls and the navigation voice output will first be heard.
➮Press the MENU button <.
➮Keep pressing the 
or 
button ;until “TEL VOL” appears in the display.
➮Set the required volume using the 
and 
buttons ;.
When you have finished making your changes,
➮press the MENU button <twice.
Note:
●You can directly adjust the volume of telephone calls and navigation voice output (whilst they are being
heard) using the volume control
?.
Configuring the confirmation beep
For some functions you will hear a con- firmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio sta- tion to a station button you will hear a confirmation beep.You can configure the beep.
➮Press the MENU button <.
➮Keep pressing the 
or 
button ;until “BEEP OFF” or “BEEP ON” appears in the display.
“BEEP OFF” means that the confirma- tion beep is switched off, “BEEP ON” means that it is switched on.
➮Make your selection using the 
or 
button ;.
When you have finished making your changes,
➮press the MENU button <.
32
