KeyCard theft protection system
DEUTSCH
This car radio is supplied with one KeyCard as standard, though it can also be operated with a second card.
If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.
When using two KeyCards, the settings stored on the first card will be adopted. How- ever, you can individually store the follow- ing functions:
Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep vol- ume.
In addition, the settings activated before switching the radio off, such as the wave- band, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity and VOL FIX will also remained stored.
This ensures that you will find your basic settings
ERR” will appear in the display. In this case please do not make any further adjustments. The system will switch off after approxi- mately ten seconds.
When inserting another card type (e.g. phone or credit card), the display will show “WRONG KC” for approximately two sec- onds.
Remove the wrong card and introduce the correct KeyCard.
After the display indications “CARD ERR” or “WRONG KC”:
•Press ON to turn on the set.
Removing the KeyCard
Never pull out the KeyCard directly!
•First, slightly push in the KeyCard. This releases the card and puts it in the proper position for being removed.
•Now you can pull it out.
•Press << or >>.
The display will switch to “CHANGE”.
•Push in the KeyCard. The card is re- leased and put in the proper position for being removed.
•Remove the first KeyCard and insert the new one while “CHANGE” is still being displayed.
After the display indication “READY” or “LEARN KC”,
•press DSC.
Now you can also use the new KeyCard for operating your unit.
A maximum of two cards can be used for the set.
When trying to “train” a third one, the ac- cess authorisation for the KeyCard not used for the “training” process will be deleted automatically.
Displaying the radio pass data
ENGLISH
FRAN AISÇ
ITALIANO NEDERLANDS SVENSKA
Putting the unit into operation
•Turn on the set.
Introduce the KeyCard into the slot with the contact area showing up (KeyCard tongue sticking out).
The car radio is now ready for operation. If a wrong KeyCard is inserted, then “CARD
“Training” a second KeyCard/ Replacing a KeyCard
While operating the unit with the first KeyCard, you can “train” a second one to be also used with the set:
•Insert the first KeyCard and turn on the set.
•Press the DSC button and select “LEARN KC” with 
/
.
Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6 ...) and serial number indicated on the display panel.
Please refer to chapter “DSC programming - READ KC”.
ESPA OLÑ
PORTUGU SÊ
37
