Blaupunkt Car CD Changer Scanning cassette titles with, Dolby B NR, Care notes

Scanning cassette titles with

SCAN

You can have the cassette titles played brief- ly by using the scan function. If you like a title, stop the scan to continue listening to that track.

To start/stop the scan function:

•Press the SC button briefly.

You can individually adjust the scan time in the DSC menu (see “DSC programming - SCANTIME”).

Dolby B NR*

With this unit you can play back tapes re- corded with Dolby-B NR or without noise reduction.

Cassette tapes recorded with Dolby NR* stand out by their reduced tape hiss and the improved dynamics.

If Dolby-B NR is switched on, “B” will light up in the display.

To switch on/off:

•Press B (not during scan operation).

*Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation. “Dol- by” and the double-D symbol are trademarks of Dol- by Laboratories Licensing Corporation.

Skipping unrecorded tape por- tions with Blank Skip

This function senses an unrecorded tape portion continuing for more than 15 seconds and automatically fast forwards the cassette to the beginning of the next track.

During fast tape winding, “B-SKIP” will be indicated on the display panel.

To switch the Blank Skip function on and off:

•Press the RM button for approximately one second until you hear a beep.

When the function has been activated, “BLS” will appear in the display.

Listening to the radio during fast tape winding with RM

(Radio Monitor)

When the tape is fast forwarded or rewound (also with S-CPS), the radio will normally be muted. To listen to the radio during fast winding, activate the Radio Monitor function. To switch RM on and off:

•Press RM.

When the function is active, “RM” will light up in the display.

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions.

Use a head cleaning tape to remove nor- mal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) soaked with alcohol. Do not attempt to clean by inserting a hard ob- ject into the player!

ENGLISH DEUTSCH

FRAN AISÇ

ITALIANO NEDERLANDS SVENSKA

ESPA OLÑ

PORTUGU SÊ

47