Switching between 12- and 24-hour clock mode | Blaupunkt CD70

CLOCK

➮Set the hours using the / buttons

7.

➮Once the hours are set, press the button 7.

The minutes will blink.

➮Set the minutes using the / buttons

7.

➮Press the OK button 5 to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

Switching between 12- and 24-hour clock mode

➮Press the MENU button 8.

➮Press the soft key 4 with the display allocation “CLK”.

➮Press the soft key 4 with the display allocation “MODE”.

➮Press the or button 7 to switch between 12- and 24-hour mode.

➮Press the OK button 5 to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

Permanent time display when unit is off

To configure the unit to display the time per- manently when the unit is off and the ignition is on,

➮press the MENU button 8.

➮Press the soft key 4 with the display allocation “CLK”.

➮Press the soft key 4 with the display allocation “VIEW”.

➮Press the or button 7 to switch between “CLK ON” and “CLK OFF”.

➮Press the OK button 5to return to the

previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.

ENGLISH

29

Image 29

Blaupunkt CD70 operating instructions Switching between 12- and 24-hour clock mode, Permanent time display when unit is off

Contents

San Francisco CD70 Open here Ouvrir s.v.p Por favor, abrir Favor abrir 14 13 Controls Table of Contents Installation Road safetyAccessories Guarantee Inserting the KeyCard Theft protection, KeyCardRemoving the KeyCard Replacing / training KeyCards Training a new KeyCard / entering the master code Optical theft protection indicator LEDLost or damaged KeyCards Switching on/off First use Changing settingsExiting the Install menu Mute setting Volume adjustmentSetting the switch-on volume Setting the volume for the warning tone beep Audio settings Setting the display brightness Setting the displaySetting the reading angle Switching to radio mode Radio modeSwitching the RDS function on and off Switching the AF function on and off Selecting short-/long-range reception Tuning to a station Storing stations automatically Travelstore Setting station scanning sensitivityStoring stations Radio scan Listening to preset stationsSetting the scan time Culture Travel Jazz Sport News POP Rock Classics Programme type PTY Interference-related bandwidth selection Sharx Optimising radio reception Changing the display Switching between stereo and monoSelecting radio text display Naming a station Radio Mode CD Mode Programming favourite CD tracks Repeating a track Repeat Current input position flashes Naming CDs Optional CD changer mode Scanning all tracks on all CDs Scan Programming favourite CD tracks Clock time Setting the time Permanent time display when unit is off Switching between 12- and 24-hour clock mode Lining up the equaliser automatically DSA Digital Sound AdjustmentSwitching DSA on/off Selecting an equaliser Select sound presetSetting the equalisers manually Sound impression/problem What to do Setting aid for the equaliser Setting the DNC increase Switching DNC line-up on/offDNC Dynamic Noise Covering Pre-amplifiers Switch-on delay for external pre- amplifierTMC for dynamic navigation systems Setting the high-pass filter Setting the frequency and level for the subwooferSubout/subwoofer High-pass filter External audio sources Technical data Blaupunkt-Werke GmbH Important notice for customers in USA San Francisco CD70