THEFT PROTECTION | SWITCHING ON/OFF | |
➮ Press the soft key 4 with the display | Switching on/off | |
allocation “LED” to toggle between “LED | There are various ways of switching the car | |
ON” and “LED OFF”. | ||
radio on and off. | ||
To exit the KeyCard menu | ||
|
ENGLISH
➮Press the OK button 5 to go up one
level in the menu or press the MENU button 8 to exit the menu. The settings are now stored.
Viewing radio pass data
Using the KeyCard that came with your unit, you can view the radio pass data, such as unit name, type number (76 ...) and serial number, on the display.
➮Press the MENU button 8.
➮Press the soft key 4 with the display allocation “KC”.
➮Press the soft key 4 with the display allocation “READ”.
The radio pass data will scroll across the dis- play.
To exit the KeyCard menu:
➮Press the MENU button 8or the OK button 5.
Caring for your KeyCard
If necessary, clean the KeyCard contacts us- ing a
Switching on/off using the button
2
➮To switch the unit on, press the button
2.
The car radio is now switched on.
➮To switch the unit off, hold the button 2 down for more than two seconds.
The car radio is now switched off.
Switching on/off using the ignition
If the car radio is correctly connected to the ignition and has not been switched off using the button 2, it is switched on/off simulta- neously with the ignition.
You can also switch on your car radio when the vehicle ignition is off.
➮To do so, press the button 2.
Note:
To protect the vehicle battery, the unit switch- es off automatically after one hour.
Switching on/off using the KeyCard
You can switch the car radio on or off by in- serting and removing the KeyCard if the unit was previously switched off using the button 2. You can read about inserting/removing the KeyCard in the chapter “Theft protection, KeyCard”.
9
