DNC - DYNAMIC NOISE COVERING

DNC - Dynamic Noise

Switching DNC line-up on/off

Covering

To switch DNC line-up off,

Dynamic Noise Covering – masking of vehi-

press the DSA button 6;

cle noise.

press the soft key 4 with the display

When your vehicle is in motion, the DNC sys-

allocation “DNC”.

The last selected DNC increase appears on

tem raises the radio volume to the volume

you consider pleasant when your vehicle is

the display.

 

stationary.

Press the

button 7.

The volume is raised depending upon fre-

“DNC OFF” appears on the display.

quency ranges and noise development inside

Press the DSA button 6. The settings

the vehicle.

are now stored.

As a result, volume and sound remain agree-

To switch DNC back on again,

able even when vehicle noise changes. Short-

press the DSA button 6;

term noises, such as those arising when you

cross a railway track, are not taken into ac-

press the soft key 4 with the display

count.

allocation “DNC”.

Lining up DNC

“DNC ON” appears on the display.

Press the

button 7.

For operation to suit your vehicle, the system

The DNC increase last selected before switch-

must be lined up using the special micro-

ing off appears on the display.

phone. Please do not line up DNC until you

Press the DSA button 6. The settings

have aligned the hifi.The microphone should

be permanently mounted near to the console

are now stored.

using the self-adhesive tape provided, how-

Setting the DNC increase

ever not in the leg area, in resounding places

or near the fan/heater vents.

You can set the DNC increase, i.e. the sensi-

The microphone mouthpiece should point

tivity with which the volume and tone are

towards the passenger area. It is best to line

raised, in five steps.

up the system in a quiet place with the en-

The “DNC 1” setting is suitable for vehicles

gine switched off.

with a loud engine and heavy-bass music.The

 

Starting DNC line-up

“DNC 5” setting is for vehicles with a quiet

engine and classical music. Experiment with

Press the DSA button 6.

the settings to find the one you prefer.

 

Hold down the soft key 4 with the dis-

To set the DNC increase,

play allocation “DNC” until “DNC ADJ”

press the DSA button 6;

appears on the display.

press the soft key 4 with the display

DNC line-up now begins. Once “DNC 3” ap-

pears on the display, line-up has been com-

allocation “DNC”;

 

 

 

 

 

 

pleted.

select the desired increase using the

Press the OK button 5.

 

 

or

 

button 7;

 

 

 

 

 

 

 

 

 

press the OK button 5.

Once you have completed all settings, press the DSA button 6.

ENGLISH

33

Page 33
Image 33
Blaupunkt CD70 DNC Dynamic Noise, Covering, Switching DNC line-up on/off, Lining up DNC, Setting the DNC increase