Specifications
Audio Power Specifications
Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from
Other Specifications
Tuner
FM
Tuning Range: Intermediate Frequency: FM Mono Sensitivity: Seek lo sensitivity:
Seek sensitivity Selectivity:
Frequency Response:
AM
Tuning Range:
Seek LO (Local) sensitivity Seek DX (Distant) sensitivity: Intermediate Frequency:
87.5- 107.9 MHz
10.7MHz
13dBf
51dBf
31 dBf
80 dB at 400kHz
65 dB (stereo), 70 dB (mono)
0.7% (stereo), 0.5% (mono)
30 dB
530 - 1,710 kHz
50dBμV
25dBμV
450kHz
50dB
Cassette
55 dB | |
Tape Wow and Flutter: | 0.10% dB |
Tape Frequency Response: |
Audio
Speaker Impedance: | ||
Maximum Amp Power: | 4 | X 35 Watts (at 4 ohms) |
RMS Power: | 4 | X 13.5 Watts (at 4 ohms) <1% THD |
Bass Control: | ± 10 dB @ 100 Hz | |
Treble Control: | ± 10 dB @ 10 kHz | |
Loud1: | + 8 dB @ 60 Hz & + 2 dB @ 8 kHz | |
Loud2: | + 12 dB @ 60Hz & + 4 dB @ 8 khz | |
Preamp Outputs: | ||
Preamp Output Voltage: | Over 3 Volts of |
General
Dimensions (w/o projecting parts/controls): | 180 x 50 x 155 mm |
| 7 x 2 x 6 1/8 in. |
Mass: | Approx. 1.4 kg (3.0 lb.) |
Power Requirement (neg. grnd.): | 12 V DC car battery |
Operating Temperature: | 15°F to 120°F, |
Supplied Accessories: | • Unit |
| • Faceplate |
| • Wire Harness, including |
| Harness |
| • DIN Sleeve |
| • Mounting Hardware |
| • Owner’s Manual in English, French, Spanish and Portuguese |
Optional Accessories: | • |
| • |
| (Harness Available in USA at |
Design and specifications subject to change without notice.
12