Blaupunkt CR127 manual Audio Power Specifications, Other Specifications

Specifications

Audio Power Specifications

Power Output and Total Harmonic Distortion: 13 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic distortion.

Other Specifications

Tuner

FM

Tuning Range: Intermediate Frequency: FM Mono Sensitivity: Seek lo sensitivity:

Seek sensitivity Selectivity: Signal-to-Noise Ratio: Harmonic distortion at 1 kHz: Separation:

Frequency Response:

AM

Tuning Range: Seek lo sensitivity Seek sensitivity: Intermediate Frequency: Signal-to-Noise Ratio: Frequency Response:

Audio

Speaker Impedance:

Maximum Amp Power:

RMS Power:

Bass Control:

Treble Control:

Loud:

Preamp Output:

Cassette

Signal-to-Noise Ratio:

with Dolby B Noise Reduction: Tape Wow and Flutter:

Tape Frequency Response:

87.5- 107.9 MHz

10.7MHz

13dBf

51dBf

31 dBf

80 dB at 400kHz

65 dB (stereo), 70 dB (mono)

0.7% (stereo), 0.5% (mono)

30 dB

30-15,000 Hz ± 3 dB

530 - 1,710 kHz

50dBμV

25dBμV

450kHz

50dB

30-5,000 Hz + 3dB

4-8 ohms

4 X 30 Watts (at 4 ohms)

4 X 13 Watts (at 4 ohms) <1% THD

±10 dB @ 100 Hz

±10 dB @ 10 kHz

+ 8 dB @ 60 Hz & + 2 dB @ 8 kHz

4-Channel, Low-Impendance (100 Ω) Preamplifier Over 3 Volts of Distortion-Free Preamp Output

55dB

65dB 0.10% dB

30-18,000 Hz + 3 dB

General

Dimensions (w/o projecting parts/controls):	180 x 52 x 155 mm, 7 x 3 x 61/8 in.
Mass:	Approx. 1.4 kg (3.0 lb.)
Power Requirement (neg. grnd.):	12 V DC car battery (11-16 V DC allowable)
Operating Temperature:	15°F to 120°F, –10°C to 50°C
Supplied Accessories:	• Unit
	• Faceplate
	• Wire Harness, including 2-Channel RCA Preamp Output
	Harness
	• DIN Sleeve
	• Mounting Hardware
	• Owner’s Manual in English, French, Spanish and Portuguese
Optional Accessories:	• 4-Channel Preamp Output Harness (Part No. 8634494218)

Design and specifications subject to change without notice. 11