If the power supply to the radio is interrupted while the code system is switched on, you need to know the right code number.
The radio will operate again as soon as you have entered the right code number.
If you lose your radio passport and have forgotten your code number, you will not be able to restart the set after the power supply has been interrupted. In this case, your radio can only be reset in our central customer service workshop or in one of our service agencies abroad.
Restart following interruption of | Now it is essential to enter the correct code | |
power supply | after the waiting period has elapsed (Cod in | |
(Code system switched on) | the display). | |
• Switch on the set. | If the radio is turned off before the waiting | |
period has elapsed, then the waiting period | ||
“Cod” will appear in the display. | ||
restarts as soon as the radio is turned on | ||
• Briefly press preset button 1, “000” will | ||
again. | ||
appear in the display. |
| |
• Enter the code number given in the | Switching the code system off | |
Blaupunkt car radio passport: | • Turn off the radio. | |
Preset button 1 only allows to choose | ||
• Simultaneously press preset buttons 1 | ||
“0” or “1”. The first “0” will not be dis- | ||
played. | and 4 and hold them down. |
DEUTSCH |
ENGLISH |
ITALIANO FRANÇAIS
Switching the code system on | Example: the code number is 0521. | ||
Precondition: | - | Press preset button 1 until “000” ap- | |
| pears in the display. | ||
The radio must be connected to permanent |
| ||
- | Press preset button 2 five times, | ||
power. | |||
| “500” appears in the display. | ||
In order to switch the code system on: |
| ||
- | Press preset button 3 twice, “520” | ||
• Turn the radio off. | |||
| appears in the display. | ||
• Hold down the preset buttons 1 and 4 |
| ||
- | Press preset button 4 once, “521” | ||
simultaneously. |
| appears in the display. | |
• Turn the radio on. | • To confirm the code number: | ||
“Cod” briefly appears before the radio | Press the upper part of the rocker | ||
begins to operate. | switch . | ||
• Release preset buttons 1 and 4. | Your car radio is now ready for operation. | ||
The code system is on. | |||
|
| ||
“Cod” will be briefly displayed each time the If three dashes appear again in the display,
radio is turned on. | you have entered a wrong code number. |
•Turn the set on.
“Cod” will appear in the display.
•Enter the code number given in the Blaupunkt car radio passport and con- firm: See example “Restart following interruption …”.
The code system is now deactivated.
Optical indication of theft protec- tion
As optical warning of the encoded car radio, the LED 
5 flashes when the ignition is switched off, provided the car radio has been connected correspondingly.
For this, please read through the installation instructions.
PORTUGUES ESPAGÑOL SVENSKA NEDERLAND
17
