Setting the DAB waveband

DAB mode

Switching between DAB and FM

You can select various settings for switching between DAB and FM radio mode. It might be necessary to switch between DAB and FM radio if the DAB or FM reception quality decreases severely.

If you select the “DAB-FM-AUTO” setting, the device automatically tunes into the FM frequency of the programme currently be- ing received (if the programme can be re- ceived on FM), or it tunes into the DAB pro- gramme of the FM station that is currently tuned (if the station is available as a DAB programme).

With “DAB-FM-MANUAL”, the device switches to the FM frequency of the DAB programme being received if you manu- ally call up the FM radio mode (if the pro- gramme can be received on FM).

If you set “DAB-FM OFF”, the FM station that you listened to last will be played when you switch to FM radio mode (if the station can be received).

Press the MENU•OK button 7.

Press the MENU•OK button 7, to dis- play the DAB menu.

Press the or button 6 repeat- edly until “DAB-FM AUTO”, “DAB-FM MANUAL” or “DAB-FM OFF” appears on the display.

Press the or button 6 to switch between the settings.

When you have ﬁnished making your chang- es,

press the MENU•OK button 7 and then the DIS•ESC button 5to exit the menu.

Assigning a programme type to a station button

Select a programme type using the or button 6.

Press and hold the desired station but- ton 1 - 5 : for longer than two sec- onds.

The programme type is stored on the se- lected button 1 - 5 :.

With the Nashville DAB47, you can re- ceive DAB programmes and ensembles on the following wavebands: “Band 3” (174 - 240 MHz) and “L-Band” (1452 - 1491 MHz). Since some countries do not use both wavebands, you can speed up seek tuning by excluding the waveband that is not supported.

Press the MENU•OK button 7.

Press the MENU•OK button 7, to dis- play the DAB menu.

Press the or button 6 repeat- edly until “DAB-BAND L”, “DAB-BAND 3” or “DAB-BAND BOTH” appears on the display.