Blaupunkt MP57 Switching the device on/off, Adjusting the volume, High volume

Startup

￿Close the control panel.

The display briefly shows "READING DISC". Next, the following appears:

•The audio CD display if an audio CD is inserted.

•The MP3 display if an MP3 or WMA CD is inserted.

The CD starts playing.

Selecting the CD as audio source

You can select an inserted CD as audio source:

￿Press the SOURCE button > repeated- ly until the desired display appears.

Note:

The CD mode can be selected only if a readable CD is inserted.

To operate the audio CD display, please read the chapter "CD mode (audio)".

To operate the MP3 display, please read the chapter "CD/USB mode (MP3/WMA)".

Switching the device on/off

The device is switched on or off with the igni- tion. The introductory animation starts and can be cancelled with the MENU/OK button <. The device plays the audio source you previously listened to.

To manually switch on the device:

￿Press the On/Off button 3.

To switch off the device:

￿Press and hold the On/Off button 3 for approx. two seconds.

Note:

To protect the vehicle battery if the igni- tion is switched off, the device automati- cally switches off after one hour.

Adjusting the volume

DANGER!

High volume

Excessive volume can damage your hear- ing and you may fail to hear acoustic warn- ing signals!

üThe devices mutes itself while it chang- es the CD in the CD changer or the au- dio source. During this mute phase, the volume may be changed, but it is not audible. Do not increase the volume during a mute phase.

üAlways set the device to a moderate volume.

￿Turn the volume control 4.

The current volume is shown on the dis- play and used for all audio sources.

Notes:

•The volume can also be changed during a phone call/navigation an- nouncement using the volume control

76