Blaupunkt MP57 Tuning into a station, Station seek tuning, Tuning into stations manually

Tuner mode

each. The FM waveband features 3 memory banks each with 5 memory locations each: FM1, FM2 and FMT.

￿In the "TUNER" menu, press the BAND button 2 to switch between the wave- bands or memory banks:

FM1 FM2 FMT MW LW

You can now perform the following actions in this waveband/memory bank:

•Tuning into a station

•Storing stations

Tuning into a station

There are three ways of tuning into a sta- tion:

•Tuning into stations automatically (sta- tion seek tuning)

•Tuning into stations manually

•Selecting stored stations

Station seek tuning

￿Press the rocker switchor =.

If you press and hold the rocker switch or =, automatic seek tuning skips the stations found until you release the rocker switch again.

The tuner searches for the next receiva- ble station in the current waveband. The adjusted sensitivity of the station seek tuning (section "Changing the seek tun-

ing sensitivity") and your settings are taken into consideration:

•The "PTY ON" setting in the "TUNER" menu: The tuner searches for stations that are broadcasting the defined programme type.

•Setting (TRAF button ; press short): The tuner sets only traffic in- formation stations.

Note:

These settings are available only for FM. An exact description of these settings can be found in the following sections of this chapter.

Tuning into stations manually

Notes:

•Tuning into stations manually is pos- sible only if the convenient RDS func- tion is deactivated.

•If you activated the "RDS ON" setting (TRAF button ; press long), you can scroll through broadcasting net- works that have previously been re- ceived with this device.

To change the frequency in increments of

100 kHz:

￿Press the rocker switch or :.

Selecting stored stations

￿Select the desired waveband or memo- ry bank with the BAND button 2.

￿Press one of the station buttons 9.

SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

83