Blaupunkt RCM 128 Changing the scan time, To start Preset Scan, Off Preset Scan

Scanning stations with Radio- Scan

Automatically storing the stron-	Scanning stored stations with
gest stations with Travelstore	Preset Scan
You can automatically store the six most	You can have all of the stored stations briefly
powerful FM stations of your current recep-	scanned on all wavebands.
tion area sorted according to their signal	To start Preset Scan:
strength. This function is particularly con-
	• Press SC for approximately two secon-
venient on longer trips.
	ds.

•Press the FMT button for two seconds. All of the stored stations of the adjusted

“T-STORE” will appear in the display.	waveband will be scanned one after the
The six strongest FM stations will be auto-
	other. The memory bank and preset posi-

matically stored on the memory bank “T” tion of the currently scanned station will flash
(Travelstore). When this process has been	in the display.
completed, the radio will play the first sta-
	To select a scanned station and switch
tion.
	off Preset Scan:
If desired, stations can also be stored
	• Press SC briefly.
manually on the Travelstore bank (see
“Storing stations”).

To select a scanned station and switch off the Radio-Scan function:

•Press SC briefly.

If no station is selected, the scan function will be automatically switched off after the frequency band has been run through com- pletely. The unit will tune in the station lis- tened to before starting the scan.

Changing the scan time

The scan time can be changed from be- tween five to a maximum of 30 seconds. Please refer to chapter “DSC programming - SCANTIME”.

Selecting the seek tuning sensi- tivity

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.

•Press the corresponding preset button briefly to recall the station.

	You can alter the automatic seek tuning
You can also scan all stations which can be	sensitivity.
	If “lo” is displayed, the radio will only pick up
received.
	strong, local stations (low sensitivity).
To start the Scan function:
	If “lo” does not light up, the radio will also
• Press SC briefly.	pick up weaker, distant stations (high sen-
The scanned frequency or the station name	sitivity).
will start flashing in the display. During the	The sensitivity level can be altered in both
actual scanning process “FM-SCAN” or	modes (see also chapter “DSC program-
“AM-SCAN” will be displayed.	ming”).

44