| TIME | The current time will be dis- TA VOL | To adjust the traffic an- | |
| 
 | played or has to be set. For | nouncement and warning | |
| 
 | more information see chap- | beep volume from between | |
| 
 | ter “Traffic Memo (TIM) - | 0 to 63. | |
| 
 | Setting the clock in the DSC | The message will then come | |
| 
 | menu”. | through at this volume, if the | |
| 
 | 
 | standard volume is lower. | |
| TIMER 1 | To set the first TIM time. | Should the standard volume | |
| be higher than the TA VOL | |||
| 
 | For more information please | ||
| 
 | level, then the traffic report | ||
| 
 | refer to chapter “Traffic | ||
| 
 | will be played slightly louder | ||
| 
 | Memo (TIM) - Programming | ||
| 
 | than the standard volume. | ||
| 
 | the TIM standby mode / TIM | ||
| 
 | 
 | ||
| 
 | times”. | 
 | 
Try out which SPEECH set- ting you like most.
BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second.
The volume can be adjusted from between 0 to 9. (0 = off).
ANGLE Use this setting to alter the viewing angle to your liking
TIMER 2 To set the second TIM time (procedure see TIMER 1).
CDC NAME Only available for CD chan- ger playback (optional). Use this function to name your CDs. (See “Entering CD names”).
LOUDNESS Loudness - When listening at a low level, the Loudness function creates a more nat- ural sound by boosting the low frequency range. LOUD 1 - Low boost LOUD 6 - Max. boost
SPEECH In future many RDS radio stations will differentiate be- tween music and speech programmes.
You can alter the tone for speech programmes from between “SPEECH 0 ... 4”.
SPEECH 0:
Music/speech off
SPEECH 1:
Linear reproduction (bass, treble and Loudness set to “0”)
SPEECH 
Different settings for vol- ume, bass and treble with the Loudness being switch- ed off.
from 
BRIGHT You can adjust the display brightness from between 1 to 16. You can also select different values for day and night.
Selecting the night bright- ness:
Switch on the vehicle lights and programme the bright- ness value. The car radio’s lighting connector must be hooked up to the vehicle’s electric system for this to function properly.
56
