Setting a screen delay

3.3Setting a screen delay

You can specify the length of time that elapses between when Print Screen is pressed and when the OSCAR interface starts.

Press Print Screen to start the OSCAR interface.

In the Main window, click Setup - Menu.

In the Screen Delay Time field, type the number of seconds that you want to elapse between when Print Screen is pressed and when the OSCAR interface starts.

3.4Connecting a user to a target device

Use the Main window of the OSCAR interface to select a target device to which you want to connect. When you select a target device, the keyboard and mouse are automatically reconfigured to the correct settings for that target device.

Select a target device by pressing Print Screen to start the OSCAR interface, and then use one of the following procedures:

In the Main window, double-click the target device name, EID number, or port number.

-or-

Type the port number, and press Enter. -or-

Type the first few characters of the target device name or EID number, and press Enter.

3.5Selecting the previously selected target device

You can toggle between two selected target devices by pressing Print Screen and then press Backspace.

3.6Disconnecting the user from a target device

Press Print Screen and press Alt+0. A Free status flag in the OSCAR interface indicates that the user is not connected to a target device.

590-591-609B

19

Page 27
Image 27
Siemens KVM series 3-1621 manual Setting a screen delay, Connecting a user to a target device