Siemens KVM series 3-1621 Scanning the switching system, Adding target devices to the scan list

Scanning the switching system

3.12Scanning the switching system

In scan mode, the KVM s3-1621 and KVM s3-1641 appliances automatically scan from port to port (target device to target device). Use scan mode to monitor the activity of up to 16 target devices, and to specify which target devices to scan and the number of seconds that each target device will be visible. The scanning order is determined by placement of the target device in the list, which is always shown in scanning order. You can choose to list the target devices by name, EID number, or port number by clicking the corresponding button.

3.12.1Adding target devices to the scan list

Click Setup - Scan. The Scan window opens.

Figure 25: Scan window

The window contains a listing of all target devices that are attached to the KVM s3- 1621 or KVM s3-1641 appliance. To select target devices to be scanned, complete one of the following steps:

•Select the check box next to the target devices that you want to scan. -or-

•Double-click on a target device name or port. -or-

•Press Alt and the EID number of the target device that you want to scan. You can select up to 16 target devices from the list.

In the Time field, type the number of seconds (from 3 to 255) of time before the scan moves to the next target device in the sequence.

Click OK.

590-591-609B 39