Siemens KVM series 3-1621 Removing a target device from the scan list, Starting the scan mode

Basic operations

3.12.2Removing a target device from the scan list

To select a target device to be removed from the scan list, complete one of the following steps:

•In the Scan window, clear the check box next to the target device to be removed.

-or-

•Double-click on the target device name or port. -or-

•Press Shift + Delete to remove the selected target device and all entries below it.

-or-

•Click the Clear button to remove all target devices from the scan list.

Click OK.

3.12.3Starting the scan mode

Click Commands. The Commands window opens.

Figure 26: Commands window

Select Scan Enable in the Commands window. Scanning will begin immediately. Click X to close the commands window.

40 590-591-609B