Managing target device tasks using the OSCAR interface
33
590-591-609B
• If you enter a value of 5 to 120 seconds, the first user will be warned and will b e
allowed to continue using the target device for up to the amount of time in the
Timeout Seconds field. The session will be preempted when the user clicks
OK, or when the specified timeelapses.
Click OK to save the settings.
Figure 19: Preempt window
3.11 Managing target device tasks using the OSCAR interface
From the commands window, you can manage the switching system and user
connections, enable Scan mode, and update the firmware.

Feature Purpose

KVM-IA Status View the version and upgrade status of the KVM-IA.
Display config View current display settings.
Run Diagnostics Configure and begin diagnostics on target devices.
Scan Enable Begin scanning the target devices. Set up a target device list
for scanning in the Setup window.
User Status View and disconnect users.
Display Versions View version information for the KVM s3-1621 and
KVM s3-1641 appliances as well as view and upgrade
firmware for individual KVM-IAs.
Device Reset Re-establish operation of the keyboard and mouse.
Table 6: Commands to manage routine tasks for the target device