Oven Programmer
The oven programmer can be used to electroni- cally control the cooking in your oven. Figure 4 shows all the
Figure 4.
Setting the Electronic Clock
When you first turn on the power to your oven, or if the power to the oven has been off for a while the display will come on showing all the
Figure 5.
To set time of day
Press in Set Clock button. A “beep” will be heard. Then press either the plus (+) or minus
properly set depress the Set Clock button again to enter the time. A “beep” will sound and the Set Clock symbol, in the upper right, will disappear.
To change the time of day simply repeat the steps described above. To check the time of day when the timer is in use depress the Set Clock button. The time of day will be displayed briefly and then will return to the timer function.
Timer
The timer acts as a kitchen timer, counting down from the set time.
To Set Timer
•Press Timer button. A “beep” will be heard and the display will change from showing the time of day to read zero (.00) and say SET TIMER, to the right, as shown in Figure 6.
•Then press either the plus (+) or minus
Figure 6.
Notes: 1. Each time the plus (+) or minus
2.If the plus (+) or minus
•Once the desired time interval is set release the buttons.
•The timing interval will start after approxi- mately 4 seconds.
9
