TIM standby mode while the radio is switched off
When the radio is off, you can set the TIM timer such that the broadcast traffic messa- ges will be automatically recorded at the programmed times. To recall these messa- ges, proceed as described above.
Programming the TIM standby mode / TIM times
You can programme two TIM times (TIMER 1 and TIMER 2).
For example, TIMER 1 could be the time when leaving home in the morning, TIMER 2 the time when driving home after work.
The TIM times to be programmed should correspond to the approximate times of de- parture. The radio then records all traffic in- formation broadcast for 90 minutes before - and after - this time, i.e. lasting a total of three hours.
Attention: During this period, a motor an- tenna will remain extracted. Note the corre- sponding warning note at the end of this chapter.
|
|
|
| adjusted |
|
|
| |
start |
| end | ||||||
|
|
| 1.5 hours |
|
| 1.5 hours |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
The motor antenna will be extracted
•Use the rocker switch 
/
to select “TIMER 1” in the DSC menu.
•Press << or >> to recall the adjusted time.
If “TIM OFF” is displayed, the TIM function is inactive.
•Press 
/
to set the timer.
•Press << to set the hours and >> to set the minutes.
Once you have completed the setting,
•press 
or DSC.
The clock setting for TIMER 1 has been stored.
Proceed in the same way to set the TIMER 2.
When the radio is off, TIM will be active 90 minutes before and after the programmed TIM times.
If TIM is activated, the radio will generally stay on standby for three hours after having turned it off, independent of the program- med TIM times. When TIM is active, the dis- play will briefly show “TIM ON” when turning off the set.
Deactivating the TIM standby mode
You can deactivate the TIM standby mode separately for TIMER 1 and TIMER 2.
•Press DSC when the radio is on.
•Use the rocker switch 
/
to select “TIMER 1” or “TIMER 2”.
•Then press the 
button and switch to “TIM OFF” by means of the rocker switch 
/
(you will find this item be- tween the clock settings for 23:00 and 0:00).
When “TIM OFF” is flashing,
•press 
.
If you wish to deactivate both timers, pro- ceed in the same way to switch the other timer to “TIM OFF” as well.
When your motor antenna is retracted im- mediately after having turned off the radio, you can be assured that the TIM standby mode is inactive.
Note:
The standby mode will be automatically switched off if the car radio is not turned on within 72 hours.
50
