Blaupunkt RCR 148 operating instructions Folk Music Documentary

FOLK MUSIC

DOCUMENTARY

ALARM TEST (for service only)

Checking the programme type of the station

•Press PTY for approximately 1 sec. After the beep tone the display will show the programme type offered by the tuned in sta- tion.

If “NONE” appears in the display, the cur- rent station has no PTY code.

Displaying the selected programme type

•Press << or >>.

The programme type selected last will be displayed briefly.

Selecting a programme type

a)Using the preset buttons

When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory.

•Press one of the presets 1-6. The selected programme type will be displayed for 2 seconds.

If you wish to listen to a station with this PTY,

•press / to start seek tuning.

If the system is unable to find a station of- fering the selected programme type, the dis- play will show “NO PTY” and a beep tone will be released. The station received be- fore starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to chap- ter “Storing programme types”.

b)Using the << >> buttons of the rocker switch

When PTY is switched on, you can se- lect a programme type using buttons << >>.

•Press << or >>; the programme type selected last will be displayed for 3 seconds.

•During this period press >> (for- wards) or << (backwards) to select the desired type.

•Press << or >> as many times as required.

If you wish to listen to a station offering the selected PTY,

•press / to start seek tuning.

If the system is unable to find a station of- fering the selected programme type, the dis- play will show “NO PTY” and a beep tone

will be released. The station received be- fore starting seek tuning will be tuned in.

Storing programme types

At the factory, one programme type was assigned to each of the preset buttons 1-6. If desired, you can also store other availa- ble programme types.

To do so, make sure that “PTY” lights up in the display.

•If necessary, press the PTY button to switch on the function.

•Select a programme type using but- tons << >> and

•hold down the desired preset button (1-6) until you hear a beep.

Now the selected programme type can be recalled by pressing this preset. For this, the PTY function must be active.

Scanning stations with PTY-SCAN

Condition: “PTY” must appear in the display.

•Press the SC button.

All of the received stations offering the se- lected programme type will be scanned.

To switch off PTY-SCAN:

•Press SC once again.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

37