Blaupunkt RCR 148 Station tuning, Storing stations, Automatic tuning, Manual tuning with

Models: RCR 148

1 24
Download 24 pages 50.6 Kb
Page 13
Image 13

Station tuning

Automatic tuning /

Press /; the car radio will automati- cally search for the next station.

When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards di- rection.

Manual tuning:

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rock- er switch depressed, the frequency scan is speeded up.

Scrolling through the broadcast- ing networks (FM only)

Changing the memory bank

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is in- dicated in the display.

• Press the FMT or BND button as many times until the desired memory bank lights up in the display.

Seek tuning

Up

Down

<</ >> Up/Down in short intervals

(FM only, “AF” must be switched off)

Manual tuning with << >>

You can also tune in a station manually.

Condition:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF or PTY briefly.

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY.

For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display).

For this purpose, start automatic tuning, e.g. using Travelstore:

Press FMT or BND for 1 sec.; the system starts to run through the fre- quency band. The display shows “T-STORE”.

If “AF” does not light up,

press AF.

This fulfils the requirements for selecting stations with << >>.

Storing stations

On FM, you can store six stations on the preset buttons 1-6for each of the memory banks I, II and T.

On MW/LW, you can also store six stations each. (only Bergamo RCR 148)

Select the desired memory bank.

Tune in a station with the rocker switch (either automatically / or manually << >>).

Press and hold down the desired pre- set button until the radio resumes play after the muting (takes approximately 1 sec., confirmed by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

34

Page 13
Image 13
Blaupunkt RCR 148 operating instructions Station tuning, Storing stations, Automatic tuning, Manual tuning with