CD/MP3/WMA/iPod mode
If the USB data carrier is initially selected as audio source, the data are read first.
Notes:
•If the connected USB data carrier cannot be seen, "USB ERROR" is briefly displayed.
•The time required for reading in the data depends on the design and size of the USB data carrier.
Removing a USB data carrier
Switch off the car sound system so that the data carrier will be correctly unregistered.
Disconnect the USB data carrier.
After you pulled off the data carrier from the
USB port at the front of the device, close the protective cap of the USB port :.
Inserting/removing the memory card
Inserting the memory card
Detach the control panel.
Insert the memory card with its labelled side up and its contacts first into the card slot B until it clicks into place.
Attach the control panel.
After
Notes:
•If the inserted memory card cannot be played, "SD ERROR" is briefly displayed.
•The time required for reading the card depends on the design and size of the memory card.
Removing the memory card
Detach the control panel.
Push on the memory card until it disengages.
Pull the memory card out of the card slot B.
Attach the control panel.
Selecting tracks
Turn rotary control 7 one notch counter- clockwise or clockwise to change to the pre- vious/next track.
Notes:
•If you turn rotary control 7 several notches
•If the current track plays longer than 3 seconds and you turn rotary control 7by one notch
Fast searching
Press the rotary control 7once.
The display briefly shows "CUE/REVIEW".
Turn the rotary control 7 until the desired position has been reached.
Note:
If you press the rotary control 7 twice, the
display briefly shows "TRACK SELECT". By turning the rotary control 7, you select a different track.
Interrupting playback
Press the 3 button 
> to interrupt the playback ("PAUSE") or to continue it.
Scanning all tracks
The scan function scans all available tracks.
Press the rotary control 7for approx. 2 sec- onds to start the scan, or briefly to continue playing the currently scanned track.
During the scan, the display alternately dis- plays "SCAN" and the current track number or file name.
Note:
The scan time can be adjusted (see the chap- ter "User settings", section "Making settings in the "VARIOUS" menu", menu item "SCAN TIME").
12
