Blaupunkt TRUE External audio sources, Sound settings, Front AUX-IN socket, Danger

External audio sources Sound settings

External audio sources

Front AUX-IN socket

Danger!

Increased risk of injury from connector.

In case of an accident, the protruding connector in the front AUX-IN socket may cause injuries. The use of straight plugs or adapters leads to an in- creased risk of injury.

For this reason, we recommend using angled jack plugs, e.g. the Blaupunkt accessories cable (7 607 001 535).

As soon as an external audio source, such as a portable MP3 player is connected to the front AUX-IN socket ;, it can be selected with the SRC button @. "AUX" then appears on the display.

Notes:

•You can enter an individual name for the AUX source that is shown on the display in AUX mode (see the chapter "User settings", section "Making settings in the "VARIOUS" menu", menu item "AUX EDIT").

•You can play back an AUX source at the same time with one of the internal audio sources of the car sound system. Hence, you can play back the announcements of

a navigation device connected to the front AUX-IN socket ; via the loudspeakers of the car sound system while listening to the radio or a CD at the same time. In ad- dition, you can adjust the volume levels of both audio sources to each other. For more details, please read the section "Making settings in the "VARIOUS" menu", menu items "AUX MIX" and "AUX MIX GAIN" in the chapter "User settings".

Sound settings

The following sound settings can be changed in the "AUDIO" menu:

•Adjusting bass and treble

•Setting the left/right volume distribution (Balance) or front/rear (Fader)

•Adjusting the increase of bass at low volume (Loudness)

•Selecting a sound profile (Sound Preset)

•Setting level and frequency of the preamplifier output (Sub-Out)

•Setting the 3-band equaliser

•Adjusting the time delay for switching in an external amplifier

Calling and exiting the "AUDIO" menu

￿Briefly press the MENU button 2 to open the user menu.

￿Turn the rotary control 7 until the "AUDIO" menu item is selected.

￿Press the rotary control 7 to open the "AUDIO" menu.

￿Turn the rotary control 7 until the desired menu item is selected.

￿Perform the setting (see the next section).

￿Briefly press the MENU button 2to exit the menu.

Notes:

•The menu is automatically exited approx. 60 seconds after the last button activation and you are returned to the display of the current audio source.

•To go back to the next higher-level menu, turn the rotary control 7 until the "<<<"

option is selected and press the rotary con- trol 7.

23