Radio mode
Changing to radio mode or selecting a memory bank
The following memory banks are available in the different reception areas:
Region | Memory banks |
EUROPE | FM1, FM2, FMT, MW, LW |
USA | FM1, FM2, FMT, AM, AMT |
SOUTH AMERICA | FM1, FM2, FMT, AM, AMT |
THAILAND | FM1, FM2, FMT, AM, AMT |
Press the SRC button @repeatedly until the desired memory bank is displayed.
Notes:
•Up to 5 stations can be stored in each memory bank.
•You can disable certain memory banks that you do not want to use (see chapter "User settings", section "Making settings in the "TUNER" menu", menu item "BAND SELECTION"). Deactivated memory banks
are skipped during the source selection with the SRC button @.
Tuning into stations manually
Press the rotary button 7 once to activate manual station tuning.
The display briefly shows "SEARCH MANUAL".
Turn the rotary control 7to change the fre- quency in increments.
Note:
The manual station tuning is automatically exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is started by turning the rotary control 7.
Storing stations or calling stored stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button 1 - 5 > for approx. 2 seconds to store the current station under the button.
- or -
Briefly press the station button 1 - 5 >to call up the stored station.
Tuning into a station
There are various ways of tuning into a station:
Starting station seek tuning
Turn rotary control 7 one notch counter- clockwise or clockwise to start station seek tuning.
The display briefly shows "SEARCH AUTO". The radio tunes into the next receivable sta- tion.
Notes:
•For the reception area "EUROPE": In the FM waveband, only traffic information stations are tuned into if the priority for traffic infor- mation (
) is switched on.
•The sensitivity of seek tuning can be ad- justed (see the chapter "User settings", section "Making settings in the "TUNER" menu", menu item "SENSITIVITY").
Scanning stations
With the scan function, you can scan either every receivable station or every stored station of the current waveband.
Note:
You can adjust the scan time for each station (see the chapter "User settings", section "Mak- ing settings in the "VARIOUS" menu", menu item "SCAN TIME").
Scanning all receivable stations of the waveband
Press the MENU button 2for approx. 2 sec- onds to start scanning.
During the scan, the display alternately dis- plays "SCAN" and the current frequency as well as memory bank or station name.
Briefly press the MENU button 2 to con- tinue listening to the station that is currently being scanned.
8
